Three Point Chuck
AG1J Series – Ø25, 32, 40, 50, 63 mm

• Constant center of gripping
• Hard anodised body
• Suitable for internal or external holding
• Compact design
• Magnetic sensing as standard

Tandem Cylinders
A23T, A24T Series – Ø32 to 125 mm

• Adjustable cushioning at both ends
• Wide varieties of mountings as per ISO 15552 / VDMA 24562 standards
• Magnetic and Non magnetic version
• Aluminium profile (square) cylinder barrel
• Magnetic sensor common for all sizes (Refer Magnetic sensor catalogue)
• Piston rod – Non rusting (SS 303 material on request)*

Rotary Clamp Cylinder
A01R1 Series – Ø12, 16, 20, 25, 32, 40, 50, 63mm

• For ease of loading & unloading workpiece at restriction
• High speed operation : 0.2 sec/stroke
• Compact cylinders with strong clamping force, Ø12 to 63mm
• Reed switches can be mounted on cylinder surfaces as input signals to controllers
• Improved mounting accuracy. Guide bush and positioning pin hole ensure high-precision mounting
• Body machined from extruded aluminium that mounts directly to equipment for rigid, secure mounting in small space
• Compact equipment design is possible. Suited for electronic parts inspection clamps. Ideal for use in small mounting space
• A built-in magnet is standard, sensor can be directlymounted. Mounting from 3 directions (Ø12 to 16mm) (4 directions for Ø20 to 63mm)

Rotary Actuator
A1R-10, A1R-12, A1R-15, A1R-18, A1R-20, A1R-25, A1R-28, A1R-32, A1R-40, A1R-50, A1R-63

• Key slot type
• Sizes available – Ø10, 12, 15, 18, 20, 25, 28, 32, 40, 50, 63 mm
• Choice of 90° or 180° rotation options
• Angle of rotation adjustable by 45°
• Magnetic sensing as standard
• Compact design

Regulator with Tamper Proof
R1 Series – G1/8, 1/4, 3/8, 1/2, 3/4, 1

• Conforms to ISO 6953 – 1
• Suitable for panel and modular mountings
• Non raising Press to Lock adjusting knob for locking at any set pressure
• Diaphragm operated, relieving type
• Pressure compensated by Balanced poppet
• Flow compensated in models R14, R15 and R17 ( with venturi ) for faster response
• Good flow and regulating characteristics
• Tamper proof (Setting secured via screw on knob)

Pressure Indicator
PN Series – M5, G1/8, G1/4

• Compact size
• Quick response
• Panel mountable
• Noiseless performance

Pneumatic Timer
GT Series

• Pressure – independent
• Panel mounted
• Provision for DIN rail mounting
• Requires little space for installation
• No continuous air supply required
• Stationary preset value

Pneumatic Reset Module
GM Series

• Output signal of adjustable length 0.2 to 2 seconds
• Panel mounted
• Provision for DIN rail mounting
• Compact design
• Stationary preset value

Pneumatic Preset Counter
GC Series

• Continuously visible preset
• Integrated pneumatic reset
• 3 or 5 digit display
• Convenient button setting

One Touch Fittings (Mini)
WP3 – Series Male Connector & Male Elbow – Ø4 & Ø6 mm

• Miniature – Save space
• Attractive design
• Compact size
• Full area of the inner bore of the tubing is available for flow of fluid
• Bubble tight sealing of tubes
• Suitable for both Nylon and PU tubing
• Easy and quick push-in connection of tube / easy removal of tube by simple pressing of collet cap
• “New design” – Stainless steel collet
• Teflon pre-coated male taper threads
• Maintenance free and long life
• The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet

Miniature Cylinder A53 A54
Double End – As per ISO 6432 / CETOP RP52P standards (Ø12 – 25mm)

• Elastomer cushioning at both ends
• Wide varieties of mountings
• Low friction
• Long life

FRC with Tamper Proof
FRC1 series – Sizes G1/8, 1/4, 3/8, 1/2, 3/4, 1

Features
• Modular type
• Suitable for panel mounting
• Filter
  • Bronze filtering element
  • Separator and shield for efficient moisture separation
• Regulator
  • Diaphragm operated, relieving type
  • Pressure compensated by balanced poppet
  • Flow compensated in models FRC14, FRC15 and FRC17 for faster response
  • Non raising press to lock adjusting knob for locking at any set pressure
• Steel bowl guard, bayonet type on FRC14, FRC15 & FRC17 models and threaded type on FRC13 model
• Good flow and regulating characteristics
• Tamper proof (Setting secured via screw on knob)

Compact Valve – G1/4
DS5 series – 5/2 Double external solenoid pilot valve

• Mounting provision for individual unit
• Compact size
• Manual override
• Wide range of coil voltages
• Suitable for manifold mounting (M004…series)

Solenoid Valve – DMN Series
2/2 Normally Closed pilot operated solenoid valve

• Diaphragm operated poppet seat type
• Wide range of coil voltages
• Continues duty cycle
• Manual operator (push type)
• Good flow characteristics
• Compact in size

Compact Valve – G1/4
DS5 series – Single solenoid pilot operated valve

• Mounting provision for individual unit
• Compact size
• Manual override
• Wide range of coil voltages
• Suitable for manifold mounting (M004…series)

Compact Vavle – M5
DS2 series

• Suitable for manifold mounting
• Mounting provision for individual unit
• Compact size
• Manual override
• Wide range of manifolds available
• Wide range of coil voltages

Compact Valve (10mm Coil)
DS2 series – G1/8

• Suitable for manifold mounting
• Mounting provision for individual unit
• Compact size
• Manual override
• 24V DC with 10mm coil width

Compact Guided Cylinder
Compact Guided Cylinder – (Ø12, 16, 20, 25, 32, 40, 50, 63mm) Series A91

• For ease of loading & unloading workpiece at restriction
• High speed operation : 0.2 sec/stroke
• Compact cylinders with strong clamping force, Ø12 to 63mm
• Improved mounting accuracy. Guide bush and positioning pin hole ensure high-precision mounting
• Body machined from extruded aluminium that mounts directly to equipment for rigid, secure mounting in small space
• Compact equipment design is possible. Suited for electronic parts inspection clamps. Ideal for use in small mounting space
• Adjustable stroke on request