Series 2000 Magnehelic® Differential Pressure Gages.
Series 2000 Magnehelic® Gage uses Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67.
Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
For Textile applications we offer:
Model : MS 151 , Range – 5kPa
Model : MS 311 , Range – 250,500,1250 Pa
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct, Room or Building Pressures
- Clean Room Positive Pressure Indication
Select the Dwyer® Magnehelic® gage
for high accuracy — guaranteed within 2% of full-scale — and for the wide choice of 81 models available to suit your needs precisely. Using
Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates low air or noncorrosive
gas pressures — either positive, negative (vacuum) or differential. The design
resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or
cause toxic or leveling problems. It’s inexpensive, too.
The Magnehelic® gage is the industry standard to measure fan and blower pressures,
filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid
levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also
checks gas-air ratio controls and automatic valves, and monitors blood and respiratory
pressures in medical care equipment.